Whirlpool Dishwasher Diagnostic Mode

The Whirlpool dishwasher diagnostic mode is a significant functionality built into the unit to support precise troubleshooting.

Here in this guide, we will look at everything you need to know about the diagnostic mode, so you can simply enter, troubleshoot, and simply reset your dishwasher for better performance.

Whirlpool Dishwasher Diagnostic Mode

The Whirlpool dishwasher diagnostic mode supports you to determine what’s wrong with your unit if it won’t start if the buttons fail, if some cycles won’t work, and if water fails to flow.

When in diagnostic mode, you can effortlessly inspect, identify, and simply fix problems causing the dishwasher to fail to achieve optimally.

Preferably, it can simply be interesting to figure out what the problem with your dishwasher is without this mode.

Now, so anytime you notice there’s a problem with the unit, like the Whirlpool dishwasher not turning on, run the mode, simply retrieve the Whirlpool dishwasher error, and fix the problem as fast as you can.

What is Whirlpool Diagnostic Mode? 

Preferably, a diagnostic mode in a Whirlpool dishwasher is a learned state used to troubleshoot problems by simply viewing and inspecting the problems stored in an error log.

Now, in this state, you can do an automatic diagnostic cycle, or you can physically turn different parts of the washer on and off to inspect performance status, identify errors, test proper operation, and fix problems.

Some Ways to Enter the Whirlpool Dishwasher Diagnostic Mode:

Now, that you know what the diagnostic mode is in the Whirlpool dishwasher, simply look at the dissimilar ways to enter the mode.

• Using Cycles + Start/Cancel Button

The initial option to simply enter the Whirlpool dishwasher diagnostic mode is to use the Cycle and Start/Cancel option button combination.

• You need to turn the dishwasher off and simply make sure all the LED lights are off and unplug the machine from the power source.
• You need to reconnect the unit to the power source and simply open its door
• After that, simply press a combination of Cycles and Start/Cancel buttons once and also press the two buttons again, but this time hold them down for about 60 seconds
• At last, simply close the door 

The unit should start running the diagnostic mode.

• Pressing a Combination of Three Buttons

Some Whirlpool dishwasher models allow you to enter the diagnostic mode by simply pressing a mixture of three keys in the 1-2-3 sequence.

But there are simply two important rules to detect for this method to work:

• The mixture of the keys you select should not include Start, Delay, or Cancel option button
• The press delay from one to the next button option should not be more than a second

Some models need that you press button #2 and then shut the Whirlpool dishwasher door to start the service cycle. That’s faultlessly fine because the diagnostic mode can only run with the door closed. 

• Using a combination of on/Off and Start/Pause

You can also enter the Whirlpool dishwasher service mode by simply pressing a combination of On/Off and Start/Pause buttons and to do this:

• You need to turn off the unit and simply ensure there are no lit LED lights
• You need to disconnect it from the power outlet
• After that, you need to wait for at least 10 seconds and simply reconnect the dishwasher to the power outlet 
• Now, with the door open, rapidly press the combination of On/Off and Start/Pause buttons
• You need to hold the buttons down within the first 60 seconds of reconnecting the power for this technique to work 
• At last, simply close the door

The unit should enter the service mode thereafter.

• Using the Rinse and Start Button

The other choice to enter the Whirlpool dishwasher service mode is to press a mixture of Rinse and Start buttons and simply the steps to follow to enter the mode aren’t dissimilar from those we’ve discussed for options 1 and 3.

• You need to turn your dishwasher off, and simply make sure the LED lights are off 
• After that, you need to disconnect the unit from the power source
• Then, you need to reconnect the unit to the power source and open its door and simply press and hold the Rinse and Start button
• Again, you need to press and hold down the two buttons for about 60 seconds of reconnecting the unit to the power source 
• At last, simply close the door

Your Whirlpool dishwasher should automatically enter the diagnostic mode. If there’s one thing that’s strong so far, it’s that it isn’t problematic to enter the diagnostic mode.

Now, for the first, third, and fourth options, the entry process is pretty similar. The only difference is that you have to press a different mixture of buttons.

It’s significant to keep in mind that we’ve highlighted the dissimilar ways to enter the mode to help you determine which choice will work finest for you depending on the model of your dishwasher.

FAQs (Frequently Asked Questions):

1. How do you reset my Whirlpool dishwasher diagnostic mode?

Now, to reset your Whirlpool dishwasher diagnostic mode, you need to press the “Heated Dry” button and then simply press the “Normal” option fast.

After that, you need to press the “Heated Dry” button for a second time followed by the “Normal” button, and doing so will wake the unit’s diagnostic mode, causing it to reset finally.

2. What is the most common problem with a Whirlpool dishwasher? 

The most mutual problem with a Whirlpool dishwasher is the incapability to clean dishes. The appliance might fill with water, but the wash pump fails to circulate the water or run a wash cycle. You will need to substitute the motor or wash the pump to simply fix this problem.

Also Check:

• GE Dishwasher Won’t Start But Has Power
• Bosch Dishwasher Cycles Explained
• How to Reset Maytag Washer
• GE Cafe Refrigerator Problems Solved

Conclusion:

We have shared everything about Whirlpool Dishwasher Diagnostic Mode in this article for you if the info that we shared above helped you in any way then do share it with others.