Schlage Keypad Lock Keeps Spinning: How to Fix

Now, if your Schlage Keypad Lock keeps spinning and you’re observing for tips to resolve this problem, this post is your go-to resource.

Now, in the following paragraphs, we’ll walk you through some handy tips to troubleshoot this issue. In short, if your Schlage Keypad Lock keeps spinning, replace the batteries.

Schlage Keypad Lock Keeps Spinning

If that doesn’t support, perform a factory reset on the lock and simply this should resolve the problem. If you want more details on how you can go about this issue, simply keep reading.

How can you fix a Schlage Keypad Lock that Keeps Spinning?

1. Change the Batteries in Your Lock

If your Schlage Keypad Lock keeps spinning, start your troubleshooting by simply substituting the batteries in the lock. The lock is battery-powered, so it might develop some issues if the batteries are low. Now, for this issue, the motor of the lock might not have the necessary power to engage the mushroom pin fully because the battery power is low.

Your Schlage Keypad lock will blink red reliably when the batteries are low. If you see red flashes on your lock, get a new set of batteries and simply replace the old ones. For Schlage BE365, get a 9V battery and just replace the old one.

However, if you don’t see red flashes on the lock, you should still go ahead and simply replace the batteries.

Occasionally, the batteries in your lock might drain out rapidly without the usual warnings perhaps because the batteries are bad or because of the cold. If your Schlage Keypad keeps spinning after substituting the batteries, simply continue to the next step.

2. Restore Default Settings on the Lock

Now, an alternative fix to try if your Schlage Keypad Lock keeps spinning is to simply reset the lock. Resetting the lock will erase all settings in your lock and restore the default settings. This typically supports fixing problems caused by incorrect settings or internal glitches.

But before you simply reset your lock, look for the default Programming Code, as you’ll need it to program your lock after the reset. Next, you can simply go ahead with the reset. Here is how you can do that:

• You need to remove the battery cover and disconnect the battery.
• After that, you need to press and release the Schlage button.
• Then, you need to reconnect the battery and simply press and hold the Schlage button until you see a green light and the lock beeps. This step should be finished in 10 seconds.

Now, if this method doesn’t reset your lock, simply read more about resetting a Schlage keypad Lock.

3. Reinstall the Lock

If the problem continues after the reset, the lock might have been installed wrongly. Your Schlage Keypad Lock might develop issues, such as spinning, and not locking/unlocking if it’s not installed correctly.

You’ll need to eliminate the lock from the door and install it. Simply get the user manual that came with your lock and follow the installation guidelines correctly. If you don’t have the user manual, try googling your Schlage lock model installation instructions or get an expert to support you reinstall the lock.

More so, a component in your lock might have been broken or removed from its original position (this is common with the Schlage BE365 Keypad Lock). Now, if you discover that a component in the lock is broken while reinstalling it, simply contact Schlage Customer Support for a replacement.

The video below shows how you can simply fix the spring in your Schlage Keypad Lock and this should support resolving the spinning issue.

FAQs (Frequently Asked Questions):

Why Schlage lock not locking from the outside?

• You need to replace your Schlage Keypad Lock’s battery.
• You need to check if you have the lock’s mode set to “unlocked.”
• You’re not properly locking the lock.
• The lock’s functionality is being disadvantaged by a problem.
• You didn’t install your Schlage Keypad Lock properly.

Why does Schlage lock unlock without a code?

Here are numerous potential causes of your Schlage keypad lock unlocking without a code:

• The lock is arranged to be unlocked.
• Low or improper batteries.
• Faulty installation
• The lock isn’t working appropriately.

Schlage Lock Override

Now, if the Schlage keypad lock still won’t open, the Lock Override feature might have been turned on. Simply disabling it could be able to solve your issue do the following to disable the Lock Override feature:

• The battery cover on the interior assembly should be detached.
• You need to remove the battery from its socket carefully.
• You need to verify that the lock override slot is locked out.
• If so, you need to use a little flathead screwdriver to spin it back to normal.
• Reinstall the battery after which you’ll fix the lid. 

Also, Check:

• How to unblock someone on Facebook
• How to Remove iCloud Activation Lock from iOS
• How To Block Spam Calls And Message on Android Phone

Conclusion:

You can simply fix your Schlage Keypad Lock that is spinning by altering the batteries and resetting the lock.

However, these fixes don’t work all the time and if you’ve replaced the batteries and reset the lock, but it keeps spinning, the installation might be wrong.

You need to remove the lock from the door and install it back accurately and if the problem is not resolved after this, just contact Schlage Customer Support for help.

You might also need to get a new lock liable on how long you’ve used it and the lock might be too old and have reached the end of its lifetime.

We have shared everything about Schlage Keypad Lock Keeps Spinning in this article for you if the info that we shared above helped you in any way then do share it with others.